Adaptor – steel.
Centre tube steady bearing.
Centre tube seal – ptfe + nitrite rubber.
Body – steel.
Seal – polyurethane rubber.
Locking ring – steel.
Double row angular contact ball bearing.
Locking ring – steel.
Spindle – steel, hard chromed on sealing surface.
Sealing washer – steel and nitrite rubber.
Distributor – steel + tube – stainless steel.
‘O’ rings – nitrite rubber.
The XP/MO Swivel Joint is a double channel unit with an ‘O’ ring sealed interface for slow continuous rotation and intermittent angular movements.
| Nominal size |
Part No. | Max. Pressure (bar) |
| 2×6 (¼”) | 18700 | 400 |
| 2×10 (3/8″) | 18701 | 400 |
| 2×15 (½”) | 18702 | 300 |
| 2×20 (¾”) | 18703 | 300 |
Operational Guidelines
Fluids : Water, mineral oils and compressed air.
All fluids must be clean and free of abrasive and corrosive elements.
Pressure : 300/400 bar maximum depends on size.
Temperature : 100°C maximum.
Speed : 5 r.p.m. – intermittent.
| Flow capacity | |||
| Nominal size |
Liquids* m³/h |
Liquids* l/min |
Air** m³/h |
| 2×6 (¼”) | 0.25 | 4 | 9 |
| 2×10 (3/8″) | 0.56 | 9 | 19 |
| 2×15 (½”) | 1.61 | 27 | 56 |
| 2×20 (¾”) | 2.65 | 44 | 92 |
| * Flow at a velocity of 3 m/s ** Flow at a velocity of 15 m/s and a pressure of 6 bar |
|||
