Type M.C.T./B.E.
This is a single flow unit and is suitable for transferring fluid in to, or out of rotating machines
Type M.C.T./B.E. for single flow
| Nominal size |
Part No. with locating spigot |
Part No. without locating spigot |
| 8 (¼”) | 16310 – R or L | 16260 – R or L |
| 10 (3/8″) | 16313 – R or L | 16263 – R or L |
| 15 (½”) | 16316 – R or L | 16266 – R or L |
| 20 (¾”) | 16319 – R or L | 16269 – R or L |
| 25 (1″) | 16322 – R or L | 16272 – R or L |
| R, L depend on the direction of rotation | ||
With a locating spigot
with a locating spigot
| Nominal size |
A | B | C | D | E | F | G & P | I | J | |||||
| 8 (ž”) | G.ž” | G.ž” | 6 | 137 | 120 | 37 | 11 | 65 | 178 | |||||
| 10 (3/8″) | G.3/8″ | G.3/8″ | 10 | 140 | 122 | 40 | 13 | 65 | 180 | |||||
| 15 (―”) | G.―” | G.―” | 14 | 168 | 143 | 45 | 16 | 90 | 220 | |||||
| 20 (ū”) | G.ū” | G.ū” | 18 | 180 | 155 | 57 | 20 | 90 | 232 | |||||
| 25 (1″) | G.1″ | G.1″ | 22 | 195 | 163 | 57 | 22 | 115 | 250 | |||||
Dimensions in millimetres |
||||||||||||||
| Nominal size |
K | N | O | S | T | U | X | Y* | Z |
| 8 (ž”) | G.1/8″ | G.ž” | M5 | 4.97/4.95 | 60 | 171 | 10 | 15 | 22 |
| 10 (3/8″) | G.1/8″ | G.3/8″ | M5 | 5.97/5.95 | 60 | 174 | 10 | 20 | 25 |
| 15 (―”) | G.ž” | G.―” | G.1/8″ | 9.52/9.50 | 70 | 215 | 13 | 25 | 32 |
| 20 (ū”) | G.3/8″ | G.ū” | G.ž” | 12.70/12.67 | 70 | 227 | 16 | 30 | 45 |
| 25 (1″) | G.―” | G.1″ | G.3/8″ | 15.97/15.95 | 80 | 245 | 20 | 38 | 42 |
*The machine recess dimension should be H7 – ISO 286-2 and BS.EN 20286-2
‘G’ is the designation for parallel pipe threads to BS2779 and ISO 228/1
Without a locating spigot
without a locating spigot
| Nominal size |
A | B | C | D | E | F | G & P | I | J | |||||
| 8 (ž”) | G.ž” | G.ž” | 6 | 125 | 103 | 25 | 11 | 65 | 166 | |||||
| 10 (3/8″) | G.3/8″ | G.3/8″ | 10 | 128 | 106 | 28 | 13 | 65 | 168 | |||||
| 15 (―”) | G.―” | G.―” | 14 | 152 | 126 | 28 | 16 | 90 | 203 | |||||
| 20 (ū”) | G.ū” | G.ū” | 18 | 155 | 130 | 31 | 20 | 90 | 207 | |||||
| 25 (1″) | G.1″ | G.1″ | 22 | 180 | 148 | 42 | 22 | 115 | 235 | |||||
Dimensions in millimetres |
||||||||||||||
| Nominal size |
K | N | O | S | T | U | X | Y* | Z |
| 8 (ž”) | G.1/8″ | G.ž” | M5 | 4.97/4.95 | 60 | 159 | 10 | 15 | 22 |
| 10 (3/8″) | G.1/8″ | G.3/8″ | M5 | 5.97/5.95 | 60 | 162 | 10 | 20 | 25 |
| 15 (―”) | G.ž” | G.―” | G.1/8″ | 9.52/9.50 | 70 | 198 | 13 | 25 | 32 |
| 20 (ū”) | G.3/8″ | G.ū” | G.ž” | 12.70/12.67 | 70 | 202 | 16 | 30 | 45 |
| 25 (1″) | G.―” | G.1″ | G.3/8″ | 15.97/15.95 | 80 | 230 | 20 | 38 | 42 |
*The machine recess dimension should be H7 – ISO 286-2 and BS.EN 20286-2
‘G’ is the designation for parallel pipe threads to BS2779 and ISO 228/1
